CHAMBER TEMPERATURE SENSOR REPLACEMENT
Description
This tutorial will show how to replace the steam generator
Activities: | 4 |
Difficulty: | Low |
Necessary Tools
- Phillips Screwdriver
- 14mm Key
Replacement Parts
- Chamber temperature Sensor
CHAMBER TEMPERATURE SENSOR REPLACEMENT
Step 1
Replacement
Please unscrew the radiator (3 screws) with a screwdriver
Step 2
Replacement
Please turn over the radiator
Step 3
Replacement
Please unscrew the damaged sensor through 14mm key on the rear side of chamber
Step 4
Assembly
Please replace the cable with the pin or cut the cable and connect the cables to the new sensor and insert it in the chamber